Leading The Way in Rebar Quality: Robust FRP/GRP Pultrusion Machines

• Customization: Available
• Voltage: 380V
• Warranty: 1 Year
• Model NO.: Pultrusion machine
• Name: Four Axis Winding Machine for FRP Electrical Pipe
• Model: 10t 12t 15t 20t 25t 30t 40t 50t
• Advantages: Automation, High Productivity
• Production Teaching: Supply
• Transport Package: by Sea
• Specification: 20gp
• Trademark: Jiubo
• Origin: China
• HS Code: 3917290000
• Production Capacity: 5000
• Package Size: 300.00cm * 200.00cm * 200.00cm
• Package Gross Weight: 1000.000kg

Product Description

·FRP Pultrusion Machine

Product Introduction

>Hydraulic reciprocating pultrusion equipment

FRP pultrusion production line technical data
·Mold  mounting  plate size:1170×900×20mm 
·Mold   length:900mm
·Mold mounting plate height can be adjusted:0~80mm
·Temperature  controlsection:4
·Heating plate (upper and lower plate type):effective width 400mm,length 840mm,thickness 40mm 
·Maximum  sizeof  traction  clamping  window:1000mm(width)×300mm(height)
·Upper and lower clamping table length:400mm ·Traction:200-800kN
·Pultrusion  speed:0.1~1.0m/min

 

>Lead screw type FRP pultrusion production line
> FRP pultrusion winding production line
Winding machine technical parameters
FRP pultrusion winding production line is theperfect integration of pultrusion process and winding process,overcoming the shortcomings of separate pultrusion process and winding process,so that the longitudinal strength and transverse strength havebeen greatly enhanced, and can make the winding pipe continuous production,significantly improve the production efficiency of the pipe.
Due to the uniform winding of glass fiber,fiber felt,fiber cloth and other reinforcing materials in the circumferential direction,the pressure resistance of the pipeis significantly improved.
>Glass fiber composite bar production equipment

4 Fiberglass reinforcement
 

>Fiberglass door and window profile extrusion equipment


>Carbon fiber cable composite core production equipment
Technical parameters
· The main body of carbon fiber yarn frame adopts steel structure,which can install 120 spindles The spindle is arranged on both sides,each side is arranged in matrix form,the spindle outer
diameter is φ75,and the parallel spacing between the spindle centers is 320mm.
·The spindle is equipped with a stop plate to prevent the fiber from sliding to the yarn shaft when rotating.
·Each bundle of fiber is equipped with yarn guide device;There is no interference in the unwinding    process,and ceramic sleeve is installed on the inner wall of the yarn guide hole to ensure the contact process between the fiberbundle and the hole wall
There will be no scraping,broken strands phenomenon
·The frame chassis is movable.The yarn frame can not move when working,and the yarn frame can move as a whole when notworking
·Cabon fiber composite core pultrusion molding equipment with composite core post-curing device,
composite core from the composite core molding die,directly into the post-curing pack Set to further heat curing.
·The total length of the heating zone ofthe post-curing device is not less than 2m,and the length of theheatingzone  is  adjustable.
·The crawler tractor isused,and its compression force is compressed by air pressure
·Traction of tractor:4 tons.
·The material of the layering should be polyurethane,and the Babbitt hardness is≥85.
·Pneumatic components selectionof high-quality products.
·Traction speed range is 0.1~1m/min,continuously adjustable.
·Clamping   space   215(W)×110(H)mm
·Applicable   air   pressure:0.4~0.6Mpa;Air   consumption:≤20/min
·Take-up reel can be loaded in accordance with JB/T 7600.1-94 standard.Among them,the diameter of the side plate of the wire reel (d1)is controlled in the range of 1500~2500mm.
·The take-up function is continuous take-up,and the line speed is controlled at 0.1~1.0m/min,which is continuously adjustable.
·The take-up machine is driven by torque motor and used with the traction machine.
·The take-up machine can be controlled independently,but the control system is equipped with alarm system and emergency stop device

Company Profile

Hengshui Jiubo Composites Co., Ltd. is a company specialized in production and sales of complete sets of chemicalequipment, complete sets of fiberglass product production lines, and meantime manufacture composite material andSMC products We have got the Certificate of management system 1s09001, 1$014001, 1$045001, and $GS certificateOur Production line and products have been sold to all over the world, including the United States, Canada, Australia.Brazil, Japan, Germany, Russia, lndia, Malaysia, indonesia, Egypt and other countries, winning the support and trust ofnew and old customers.
·EPC chemical equipment series: lannheim process complete sets of potassium sulfate production equipment, sodiumsulfate production equipment, complete sets of sulfuric acid equipment, complete sets of calcium chloride production equipment;
·EPC complete sets of FRP product production line series: microcomputer controlled complete set of FRP pipes, FRPtank filament winding production line, complete set of FRP grating production line, complete set of FRP pultruded profileproduction line, SF/FF oil tank production line.
·Fiberglass product series: high, medium and low pressure FRP pipe, FRP tank, FRP tower, Polymer concrete cells.SF/FF double-layer oil tanks, FRP cooling tower, FRP SMC/BMC molded products, FRP pultrusion profiles and othercustomized fiberglass products,FRP anti-corrosion project, etc.

Certifications