Vertical Fiberglass GRP Tank for Chlor-Alkali Project

• Customization: Available
• Surface Treatment: Gel Coat
• Color: Green
• Model NO.: 1-2500m3
• Thickness: 10~30mm
• Usage: Environmental Protection, Industral, Chemical
• Product Categories: FRP Tank
• Molding Method: Filament Winding
• Material: FRP
• Fiber Type: E-Glass Fiber
• Type: Polyester FRP
• Product Name: FRP Chemical Tank
• Model: Vertical Tank
• Shape: Round Tank
• Transport Package: Steel Frame, Wood Saddle
• Specification: DN600~DN25000mm
• Trademark: JIUBO
• Origin: China
• HS Code: 3925100000
• Production Capacity: 10000sets

Product Description

Product Description

FRP tank is made with fiberglass and resin with filament winding process, it's characteristics are:

1. Light weight, its density is 1.5-1.9, equals one forth of the steel, but its strength is higher.
2. Corrosion resistant, we can select different kind of resin against the variety of the media, such as acid, alkaline, salt and oil etc.
3. The inner surface is very smooth, the roughness coefficient is 0.0084, it is easier to clean, and has good sanitary property.
4. Good property against low temperature, it can be used under the condition of -80ºC.
5. Good thermal insulation property, its thermal expansion factor is 2*10^-5/ºC, the thermal conductivity is 0.2 Kcal.m/m².h. ºC.
6. The formation is easy, maintenance is convenient and it is suitable for the comprehensive equipment, the diameter is more than 4000mm can be fabricated on jobsite.

It's volume is 1m3-5000m3, and already be widely used for Chemical, Petrochemical, dyeing, pharmaceutical, metallurgy, brewing, water treatment, chlor-alkali, etc many different industries.
 

GRP tank is composed of inner layer, the structural layer and outer layer. The Inner layer is included resin rich layer and middle layer

1 Resin rich layer

It is corrosion-resistant layer composed by resin coat and surface mat. The content of resin is more than 90%, and the thickness is not less 1.7mm.

2 Middle layer

It adopts E-chopped fiberglass and inner liner resin. The content of resin is from 65% to 75% and the thickness is not less 3.3mm. This layer can efficiently prevent the extension of fine cracks on inner surface. So it plays a role of double protection.

3 Structural layer

This layer reinforces the inner surface and leakage proof layer, resisting the out load of the tower and guarantee rigidity and strength of the pipe. It adopts the combination of E-glass woven fabric, helical winding and hoop winding. The adopted resin is structural type and the content is from 55% to 65%. The thickness depends on the calculation of the specific condition. At the production of this layer, our company adopt cross winding process, so it can avoid the occurrence of hoop cracks efficiently.

4 Outer surface layer

It is ageing resistant layer. The resin adopted includes ultraviolet absorbent and paraffin, so it can efficiently prevent the tower from ageing under the ultraviolet radiation outdoors. The thickness is 1.5mm, the content of resin should be more than 90%.

Detailed Photos

Product Parameters

Dimension table of FRP vertical tank with flat bottom
Vol. (m3)/Dia. (mm)	DN1600	DN1800	DN2000	DN2200	DN2600	DN3000	DN4000
10	5140	4090	3370
20		8030	6550	5460	4000
30				8100	5890	4550
50					9650	7390	4340
80						11630	6740
100							8340
150							12340

Certifications

 

Company Profile

     Hengshui Jiubo Composites Co., Ltd. is professional manufacturer of FRP Pipe, FRP storage tank, FRP cooling tower, FRP molded products, FRP pultruded products and relative FRP production machines & technology. Through the continuous development and introduction of professional technology, our company rely on advanced technology, exquisite craftsmanship, reliable quality and perfect service, passed ISO9001, ISO14001, OHSAS18001 certification, our annual sales of glass fiber reinforced plastic series products achieved 20,000 tons, products have been sold to all over the world, USA, Brazil, Japan, Germany, India, Malaysia, Iran, Egypt etc, and won the support and trust from new & old customers.  
Main products:
FRP tank and chemical equipment 
High, middle, low pressure FRP pipe
FRP small-scaled wastewater treatment tank
FRP cooling tower
FRP pultrusion, molded series products
FRP polymer electrolytic cells
S/F, F/F double-wall oil fuel storage tank 
Whole set of computer control filament winding machine
Whole set of FRP pultrusion machine
Whole set of FRP molded hydraulic press
Whole set of FRP grating molded machine 

     Hengshui Jiubo Composites Co., Ltd. not only have manufacture ability, but also has design ability of material, structure and products, our company can provide customers with technical advice, supply of goods and material, transportation, installation supervision etc service.

FAQ

Q: Can you choose correct raw material for our FRP product?
A: absolutely, pls provide medium & concentration, temperature, pressure etc technical parameters, PP/FRP, PVC/FRP, PVDF/FRP etc pipe/tank/tower also are in our supply scope.