| Customization: | Available |
|---|---|
| After-sales Service: | 1 Year |
| Warranty: | 1 Year |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
>JFW-2500 Semi-Automatic Winding Machine
it is suitable to the middle-sized and small-sized enterprises, it has the mould unloading machine andformed a complete set, and the main properties are below:
1. The range of diameter can be wound: DN600~ DN4000mm
2. The maxi length: 12000mm
3. The winding angle: 45°<α<90°
4. The total power: 10kw
5. The tolerance of positioning: <1mm
6. The maxi width of roving sheet: 150mm
7. The productivity: 500kg/h>JFW-1500 Semi-Automatic Winding Machine
JFW-1500 set is special equipment that can produce small-size FRP pipes and tanks, it has beenmatched the mould-unloading machine and forming set, its main properties are below.
1. The maxi diameter can be wound: DN1 500mm
2. The maxi length can be wound: 6000mm
3.The range of diameter.DN25-DN1500mm
4.The winding angle:45°~90°
5. The total power. 5.5kw
6. The maxi width of roving sheet: 150mm.
7.The productivity: 450kg/h
It has advanced electrical control system, can count the winding plies, matching gears are decided bysoft-ware, it is suitable to the small-sized projects especially.>FW-4000ll Computer Control Filament Winding Machine
The key elements such as the transducer, servo system and photoelectrical encoder are fromSiemens, Germany, the industrial control computer is made by Yanhua Corporation, Taiwan, showingthe Chinese ideograph chrominance, operating easily, after the parameters inputted into thecomputer. it can be finished the relative desian of windina linearity automatically The combinedmovements of the main axle and the carriage controlled by the computer, conforms the winding rulesthe technical parameters and its inner quality have arrived the advanced level in China, and theproperties are below.
1. The range of diameter can be wound: DN600~DN4000mm
2.The maxi length: 12000mm
3. The winding angle: 45°<a<90°
4. The total power. 10kw
5.The tolerance of positioning:<1mm
6.The maxi width of roving sheet:150mm
7.The productivity: 500kg/h>Large-Scale Site Winding Machine
Be restricted by the transportability, the tank which its diameter is more than DN4000mm has beenbecome the difficult point between the ordering party and the contracting party. To meet therequirements of the order party, our company developed this set of large scale site winding, this set iscombined structure, can be assembling or dismountable, the set can be transported to the client siteThe set is to be assembled beside the foundation of the large tank according to the reguirements ofthe client. Then the large tank can be finished.
FW-15000 Computer Control Horizontal Site Winding MachineThe major properties of the equipment are below.
The maxi diameter can be wound: 15000mm
The maxi length can be wound:12000mm
The range of diameter: DN4000-DN15000mm
The maxi torque:68350N'm
The total power. 18.6kw
The maxi width of roving sheet:1680mmThe productivity: 550kg/hVFW-25000 Computer Control Vertical Site Winding MachineGeneral
VFW-25000 computer control vertical site winding machine is the most advanced winding machine(hereinafter called Winding Machine) with super large diameter developed by our company,absorbing the foreign advanced technique. lt is controlled by computer, specially used for site windingof large caliber FRP tanks. This machine can produce FRP tanks with the diameter from 4m to25mwith the suitable mandrel. The control center of this machine is industrial computer made in TaiwanOnce input the parameters of winding product, the computer can finish the design of linearity of thetank automatically, and then control the compound movement of mandrel rotation and the shift oftrolley, put the fiberglass immersed by resin on the inner liner fully in order. This winding machine isthe combination of technique and science, such as mandrel rotation, shift of the trolley, and layout ofwinding roving are all precisely controlled by computer software. The FRP products wound by thismachine are widely used in chemical industry, petroleum, and brewery and so on.Parameters of the Winding Machine
Winding diameter scope:4m-25m
Max height for each section: 6m (Note. if it is more than 6m, it can be formed by many sectons
Winding angle:60--90°
Max rotating speed of the mandrel: 4.6rpm
Woven roving strands: 70*
Productivity: 500Kg/h*
*Note: The productivity and the quantity of strand is based upon the quality of rovingComponents of the Winding Machine
Rotating platform and vertical post driven by hydraulic system.Hydraulic pump station
Computer control system and power distribution box
Resin supply system
Roving framework and tension controller
Resin immersing system
Winding trolley
Trolley transmission system
Trolley lift guide track framework
Mandrel support ring (one specification will be provided upon the requirement of the client)
Resin pump and spraying gun
Compressed air supply system (1.4m3.7 bars)>Inner Liner Automatic Forming Machine
The following sets are the attached equipment ofFW-4000 lll; The client can manufacture itselfaccording to the free drawings
The inner liner automatic forming set is served for FW-4000 or FW-2600. lt is special equipment thatmaking the inner liner of the tank. lf this set utilized for producing the inner liner, it can improve theefficiency above 5 times. The types are ZC-4000 and ZC-2600, the main properties are below.
1.ZC-4000
1.1 The matched diameter: DN3000-DN4000mm
1.2 The power. 5.5kw
1.3 The productivity: 400kg/h
2.ZC-2600
2.1 The matched diameter: DN1600-DN2600mm
2.2 The power: 4.0kw
2.3 The productivity:400kg/h>The Complete Set Of Moulds
1 Tank steel moulds:DN600-DN4000mm
2 Pipe steel moulds: DN25~DN2500mm
3 Flange steel moulds:DN25-DN1000mm
4 Elbow steel moulds:DN25-DN300mm.
Hengshui Jiubo Composites Co., Ltd. is a company specialized in production and sales of complete sets of chemicaequipment, complete sets of fiberglass product production lines, and meantime manufacture composite material andSMC products We have got the Certificate of management system 1$09001, 1$014001, 1$045001, and SGS certificateOur Production line and products have been sold to all over the world, including the Wnited States, Canada, Australia,Brazil, Japan, Germany, Russia, lindia, Malaysia, indonesia, Egypt and other countries, winning the suppot and trust ofnew and old customers.
EPC chemical equipment series: Mlannheim process complete sets of potassium sulfate production equipment, sodiumsulfate production equipment, complete sets of sulfuric acid equipment, complete sets of calcium chloride productionequipment;
EPC complete sets of FRP product production line series: microcomputer controlled complete set of FRP pipes, FRPtank filament winding production line, complete set of FRP grating production line, complete set of FRP pultruded profileproduction line, SF/FF oil tank production line.
.Fiberglass product series: high, medium and low pressure FRP pipe, FRP tank, FRP tower, Polymer concrete cells.SF/FF double-layer oil tanks, FRP cooling tower, FRP SMC/BMC molded products, FRP pultrusion profiles and othercustomized fiberglass products, FRP anti-corrosion project, etc.
){kind=link}